10
Installation and Using
Using
1. Remove the protection foil from the display (4) and switch on the unit by
turning the ON/OFF switch. On the LC display you will see the live view of the
camera head. For adjusting the brightness of the LED, turn the rotary switch
up to the end in direction ON.
2. Insert the gooseneck into the area that has to be inspected. Bend the
gooseneck if necessary.
3. When inspecting liquid filled objects resp. when immersing the camera head
into liquids, make sure liquids cannot enter the display. The LC display is not
water-proof.
The camera head and the gooseneck are water-proof, but not acid and
fireproof. Do not immerse the camera head into hot, oily and acid substances.
4. If you do not use the inspection camera, switch off in order not
to drain the battery unnecessarily.
Using the Accessories
1. Remove the protection foil from the mirror attachment (9).
Attach the magnetic attachment (7), the hook (8) or the mirror
attachment (9) on the provided notch on the camera head (1).
With these attachments you can search for lost metal parts on
hard to reach areas and pull upwards or inspect twisty
inspection areas.
Cleaning and Storing
Clean the housing of the camera head with a dry or if
necessary with a moistened cloth. Wipe the lens of the camera head with a
lint-free cloth to keep the glass clean and grease-free. Do not use aggressive
chemicals or abrasive for cleaning.
If the gooseneck was inserted into liquids, clean it after each use and dry
thoroughly.
Protect the inspection camera from dust and dirt and store it in the delivered
carrying bag.
If you do not use the inspection camera for long period of time, remove the
battery. Leaking batteries can cause damage to the electronic circuits.
Summary of Contents for 99 00 36
Page 3: ...III bersicht Overview 2 1 3 6 5 4 9 8 7...
Page 16: ...12 Notizen Notes...
