12
Assembly and Operation
5
4
23
24
14
22
15
25
11
1
26
4. Only after that mount the locking clip (23). The hole is slid over the screw
head (4) in such a manner that the second hole is exactly over the second
hole in the cam.
5. Use the screw (24) to firmly attach the locking clip to the cam. Check the
assembly by pushing the lever to the left. The jaw should now be firmly
fixed in the slot on the base plate.
6. When the handle is swung back to the right the jab must be movable in the
slot in the base plate. If there are any problems, remove the locking clip.
7. If the jaw is not firmly locked with the handle to the left, tighten the screw
(4) a little more. If the jaw cannot be moved with the handle to the right,
loosen the screw (4) a tiny bit.
