11
Start-Up and Operation
Using the Air Compressor
▪
The power cable, the air hose and the adaptors are in the compart-
ment behind the lid (B). The lid is hooked with pins, situated on the
top and on the bottom. Grasp the lid in the middle and pull the lid
horizontally to the right direction (see arrow). Take off the attach-
ments.
▪
Check that the switch (D) is set to position
„OFF“, so the unit is
turned off.
▪
Connect the compressor plug to the 12 V cigarette lighter socket in
your vehicle or boat.
▪
The four included adaptors (E to H) are suitable for different
applications (e. g. food ball, volley ball, beach ball, inflatable bed,
bicycle tube). Attach it to the quick coupler (I). Open the lever of the
quick coupler and insert the desired adaptor in the valve extension.
Close the lever (see figure on page
III
, grey arrow).
▪
You do not need an adaptor to inflate a motor vehicle tyre. Attach
the air pressure hose with the quick coupler to the valve (lever up,
insert quick coupler to the tyre valve, lever down). Make sure the
coupler is turned as far as possible onto the valve to be closed air-
tight.
▪
Turn the switch to the
position „ON“, in order to switch on the
compressor.
▪
See the air pressure on the pressure manometer (C). Hint: This
gauge is not calibrated and we recommend before driving, check the
air pressure with a calibrated air pressure manometer.
▪
If the desired pressure is reached, turn the switch (D) in the position
„OFF“ and take off the quick coupler from the inflating object. Dis-
connect the power from the cigarette lighter socket.
▪
After filling the object store the air hose, the power cable and the
adaptor in the compartment. Push the lid towards the unit to close it
tightly.
