7
Operation
Inserting the Batteries
– LED Candles
The battery compartment of the LED candle is located at
the bottom side of each candle.
1. Unscrew the bottom of the candle by turning counter
clockwise and open the battery compartment.
2. Insert one new battery of the type LR03 (AAA) into the
battery compartment with the +pole first.
3. Close the battery compartment with the battery
compartment cover.
Replace the batteries as soon as the illuminating power
gets weaker or when the LED do not shine at all
anymore.
Inserting the Batteries
– Remote Control
1. Slide the battery compartment cover slightly off the
remote and fold it up.
2. Insert two included batteries of the type LR03 (AAA)
into the battery compartment of the remote control.
Observe the correct polarity, there are polarity symbols
in the battery compartment.
3. After that, close the battery compartment cover.
Switching ON and OFF the LED Candles
There must be a direct line of sight between the candles
and the remote (infrared) and the distance should be no
further than 5 m.
1. Press the
ON
button on the remote to turn the candles
on in continuous mode, or press and hold the
ON
button
to operate the candles in flicker mode.
