![background image](http://html.mh-extra.com/html/cooper-lighting/halo-led-h4-series-h456icat120d/halo-led-h4-series-h456icat120d_user-manual_2664000001.webp)
Catalog #
Project
Comments
Prepared by
Type
Date
HALO LED H4 Series
The Halo H4 LED is a family of 4” aperture recessed downlight
housings designed for use with Halo EL4 Series LED Light Engines
and compatible 4” LED trims. Halo H4 LED housings have integral
LED drivers that offer dimming as a standard feature.
H456ICAT120D is an insulated ceiling, AIR-TITE
TM
housing offering
120 volt dimming capability with many incandescent or electronic
low voltage dimmers. Designed for use with EL4 series LED Light
Engines and TL4 LED Series Trims, the H456ICAT120D offers high
quality downlighting along with high efficacy – the result being great
lighting and significant energy savings.
MECHANICAL
Housings
• Box enclosure of formed
aluminum construction.
• Openings are gasketed
AIR-TITE.
• Designed for insulated ceilings in
direct contact with insulation.
(May also be installed in
non-insulated ceilings.)
Plaster Frame
• Galvanized steel die-formed
construction.
• The housing can be removed from
plaster frame to provide access to
the junction box.
• Plaster frame features include:
- Patented regressed locking screw
positioned for securing hanger
bars from below the ceiling.
- Cutouts for easily crimping
hanger bars in position.
- AIR-TITE aperture gasket is
pre-installed.
- HALO identity embossed on
plaster frame.
GOT NAIL! Pass -N-Thru™
Bar Hangers
• Pre-installed nail easily installs
in regular lumber, engineered
lumber and laminated beams.
• Safety and guidance system
prevents snagging, ensures
smooth straight nail penetration
and allows bar hangers to be easily
removed if necessary.
• Automatic leveling flange aligns
the housing and lets you hold the
housing in place with one hand
while driving nails.
• Housing can be positioned at any
point within 24” joist span.
• Pass-N-Thru™ feature allows bar
hangers to be shortened without
removing from plaster frame.
• Score lines allow “tooless”
shortening for 12” joists.
• Bar hangers may be repositioned
90°.
• Integral T-bar clip snaps onto
T-bars - no additional clips
required.
Slide-N-Side™ Junction Box
• Positioned to accommodate
straight conduit runs
• Seven 1/2” trade size conduit
knockouts with true pry-out slots
• Slide-N-Side™ wire traps allow
non-metallic sheathed cable to be
installed without tools and
without removing knockouts.
• Accepts a wide range of
non-metallic (type NM) sheathed
cables - the standard cable types
used in lighting in both U.S. and
Canada.
- Allows wiring connections to be
made outside the junction box
- Simply insert the cable directly
into the trap after connections
are made.
- Accommodates the following
standard non-metallic sheathed
cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
LED Connection
• LED connector is a non-screw base
connector offering easy installation
with the EL4 Series LED Light
Engine.
• LED connector meets California
Title-24 high-efficacy luminaire
requirement for a non-screw
base socket, and where required
to qualify as a high-efficacy
luminaire.
LED Driver
• LED dimmable driver mounts
to the housing.
• Driver is a120 Volt, high efficiency,
electronic power supply providing
low voltage power to EL Series
LED Light Engines.
• Driver meets FCC EMI/RFI
Consumer Level limits for use in
residential and commercial
installations.
• Driver features high power factor
and low THD and has integral
thermal protection in the event
of over temperature or internal
failure.
• Driver is specifically designed
for compatibility with EL4 LED
Light Engines, and operates the
LED for long life, meeting 50,000
hour / 70% lumen maintenance
standard.
• If dimming is not required the
fixture can be operated from a
standard wall switch.
Dimming
• The HALO H4 LED luminaire is
dimmable to 15% with most
standard 120V dimmers;
including LED-rated and
electronic low voltage dimmers
(recommended); many
incandescent and magnetic low
voltage dimmers; and dims to 5%
using dimmers with low end trim
adjustment.
• Standard incandescent dimmers
require a minimum load of
typically over 40 watts on the
circuit for full range dimming
performance (four LED modules).
• For dimming with digital (smart)
multi-location dimmers or when
dimming fewer than four LED
modules, LED rated or electronic
low voltage dimmers are required
(ELV dimmers need a neutral
connection in the wallbox).
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Wet Location,
covered ceiling - with select trims
• UL/cUL listed for Feed Through
• UL/cUL listed for Direct Contact
with insulation and combustible
material
Compliance
• Use with designated LED light
engines and trims for ENERGY
STAR
®
qualification.
• Can be used for State of California
Title 24 high efficacy compliance
with designated LED light engines
and trims.
• Can be used for International
Energy Conservation Code (IECC)
high efficacy compliance with
designated LED light engines
and trims.
• Refer to specification sheets online
for compliance information.
Qualification
IC and AIR-TITE™
Certified under ASTM-E283 and
listed UL/cUL 1598. May be used to
meet insulated ceiling and restricted
air-flow requirements such as:
• Washington State Energy Code
• International Energy
Conservation Code (IECC)
• New York State Energy
Conservation Construction
Code (NY-ECCC)
• State of California Title 24
“Recessed Luminaires in
Insulated Ceilings.”
DESIGN FEATURES
H456ICAT120D
4-Inch LED
Recessed Housing
New Construction
Insulated Ceiling -
With 4” LED Light Engines
and 4” LED Trims
High Efficacy LED Housing-
Dimmable
H4 Series LED Energy Data:
(Values at non-dimming line voltage.)
Minimum Starting Temp: -30°C (-22°F)
EMI/RFI: FCC Title 47 CFR, Part 18
(Consumer)
Sound Rating: Class A standards
Input Voltage: 120V
Power Factor: >0.90
Input Frequency: 50/60Hz
THD: <20%
Rated Wattage: 15W max.
Input Power: 14.0W
Input Current: 121mA
Driver Compliance: UL6950, LPS rated
Maximum IC (Insulated Ceiling) Ambient
Continuous Operating Room Temperature:
25°C (77°F)
Maximum Non-IC (Non-Insulated Ceiling)
Ambient Continuous Operating Room
Temperature: 40°C (104°F)
H4 Series LED
Summary Lighting Data:
Lumen range: . . . . . . . . . . . . .534-700
Lumens per watt: . . . . . . . . . . up to 46
Color
Correlated Color Temperature
(CCT): . . . . . . . . . . . . . . .2700K-4000K
Color Rendering Index (CRI, Ra): . . . 80
www.cooperlighting.com
ADV110681
rev 4/8/11
HALO
®
F O R U S E I N
I N S U L AT E D C E I L I N G S
F O R D I R E C T C O N TA C T
W I T H I N S U L AT I O N
A L S O S U I TA B L E F O R
N O N - I C A P P L I C AT I O N S