Westfalia 90 02 50, Original Instructions Manual

Page: 26 / 38

22
Operation
Note: When inflating items of 1 o PSI or lass, inflate ln short bursts and
check after each burst by feel or with a calibrated measuring device to
determine accurate pressure.
How to use the Sport Ball Needle
• Insert the needle into the air chuck on the hig pressure hose (1) and
push the air chuck clamp down until it locks into place. Inflate to the
desired pressure.
• Insert the moistened sport ball needle into sports ball valve and
inflate.
• Remove sport ball needle from the ball and from the air chuck after
Inflation.
Note: The pressure required for most sports balls ls too low for
accurate reading on gauge.
How to use the Presta Valve Adaptor
The Presta valve adaptor can be used for Presta valve
stems as described below
. Before inflating a tyre with a
Presta valve, loosen the locking nut on top of the valve.
Once Inflation is complete, tighten the locking nut 1o seal
the tyre valve.

Loosen the Presta valve locking nut.

Thread the Presta valve adaptor onto the valve stem with the
adaptor’s interior threads.

Position the air chuck clamp in the unlock position.

Clamp the end of the air chuck down onto the Presta valve adaptor
by pressing air chuck clamp down until it locks into place.

Inflate the tyre.

After inflation, remove air chuck and Presta valve adaptor and
tighten locking nut with your fingers. Do not use tools.
Accessories Storage
When not in use, adaptors and needles provided with the compressor
can be placed in the storage area (9) located on the right side of the
compressor.