12
Using
Using the Extension Hose (9)
Connect the bayonet joint with the housing. Insert the
accessory (upholstery nozzle or long nozzle) into the
other side of the extension hose. Turn the accessory to
the right until the stop pin on the extension hose fits into
the opening of the accessory.
To remove the accessory, first press the red stop pin
down and turn the accessory to the left. Pull the acces-
sory straight out of the extension hose.
Operating
1. Connect the power plug with an earthed wall socket. The indicator light (3)
turns on. The water needs at least 3 minutes to heat up and to form enough
steam. If the temperature is reached, the indicator light turns off.
2. When using the hand steam cleaner, carry the appliance by the handle (5)
only and hold it horizontally. Press the steam button (6) shortly once. If steam
is formed the appliance is ready for use. If you wish continuous steam, hold
the steam button pressed. We recommend using the hand steam cleaner with
short time intervals so in the meantime, the appliance can form new pressure.
3. Before using the appliance for cleaning, we recommend testing the hand
steam cleaner on a hidden place.
Do not direct hot steam towards sensitive surfaces for long time but evenly
move the hand steam cleaner over the surface to be cleaned. When using the
upholstery nozzle with the cotton towel do not let the hand steam cleaner to
stand on a place for long time. Do not direct the hand steam cleaner to a cold
or frosted window. Due to the quick temperature change the window might
break.
Do not tilt the hand steam cleaner more than 45° because not only steam will
escape but also boiled water.
4. After finishing work resp. if no steam is formed, pull the power cord from the
wall socket.
