11
Using
Inserting the Accessory
All accessories are provided with a bayonet joint.
1. Insert the accessory, e. g. the long nozzle (2) as
far as it will go into the collet of the hand steam
cleaner. All accessories have arrow symbols on
both sides. One arrow symbol has to face up
when connecting to the collet!
2. For tightening the accessory, turn it to the right
until the tip of the arrow symbol is directed to the
marking on the housing. Lightly pull the acces-
sory outwards. If the accessory cannot be pulled
out, it is correctly inserted and engaged.
3. To remove the accessory, first turn the
accessory to the left and pull the part out of the
housing.
Inserting the Bend Nozzle (10) resp. the Round Brush Nozzle (11)
Either insert the bend nozzle or the round brush nozzle into the long nozzle of the
hand steam cleaner. On the outer shell of the bend nozzle and the round brush
nozzle you will find an arrow and inside the nozzles you will find a notch. This
notch fits exactly into the suitable matching part of the long nozzle. Push the
nozzle up to the end into the tip of the long nozzle.
For removing the nozzle, hold the hand steam cleaner firmly with one hand and
pull the accessory straight out of the long nozzle.
Using the Window Squeegee (13)
First, insert both hooks of the window squeegee into the suitable openings on the
upholstery nozzle (12). Press the upholstery nozzle down until the nozzle locks
audibly in the clip lock.
For removing the upholstery nozzle out of the window squeegee, fist press the
clip lock lightly outwards and remove the nozzle.
Using the Upholstery Nozzle (12) together with the Cotton Towel (7)
Put the cotton towel (7) on the upholstery nozzle. Make sure the edges of the
towel are securely placed over the nozzle. The towel is made of 100% cotton and
can be used both-way.
∆
