![background image](http://html.mh-extra.com/html/westfalia/59-71-87/59-71-87_instruction-manual_963667014.webp)
9
Operation
Saw Blades (not included in delivery)
Saw Blade for Wood with 3 TPI
Suitable for coarse sawing of wood
Saw Blade for Wood with 6 TPI
Suitable for fine sawing of wood boards
and for curves or plunge cuttings
Bi-Metal Saw Blade:
Suitable for cutting light gauge ferrous
and non-ferrous metals as well as for
making curves or plunge cuttings
Universal Saw Blade with 10 TPI
The flexible blade allows flush sawing for
coarse work in wood and plastics.
Saw Blade for Wood
Saw Blade for Plastic
Saw Blade for Metals
TPI - teeth per inch
When sawing building materials observe the statutory requirements and the
manufacturer’s recommendations. Make sure the saw blade and the blade
speed are suitable for the workpiece.
When sawing metal observe that the material can easily heat up. The saw
blade will harden and loose its cutting efficiency and flexibility.
-
Always use undamaged saw blades,
-
grease the material on the cutting site with cutting oil or lubricate,
-
do not touch the cutting site immediately after the cutting process.
When cutting woods, do not use too much pressure on the saw blade. If the
stroke rate is too fast, the cutting line will tear off.
When cutting plastics do not operate the saw with a high speed. The plastic
material will heat up, start to melt or will melt after the cutting line.
Use narrow blades for tight curved cuttings.
The length of the saw blade should not exceed the intended cutting length.