VI
Using the Foot Pump
To release the mini foot air pump, lightly press down the safety hook
(1). Slide down the pumping lever (2) and slowly allow the pumping
lever to lift up.
Using without additional Adaptor:
1. To fill a motor vehicle tyre you do not require an adaptor.
Connect the adaptor of the air-pessure hose (6) on the valve of
the tyre and push as far as it will go. By doing this you will
assure a correct and airtight fit.
2. Stand with one foot on the safety hook and step with the other
foot on the pumping lever. Pump several times in order to fill air
into the desired object. Always pump slowly and evenly.
Using with additional Adaptor:
The adaptors can be used for different applications (e. g. soccer
ball, volley ball, water ball, air mattress, bicycle tyre).
1. Slide out the transparent cover (5) of the adaptors and take out
the desired adaptor.
2. Screw the desired adaptor to the air-pressure hose adaptor and
step with one foot one the safety hook while pumping with the
other foot on the pumping lever (2).
3. On the meter you can read the current pressure. If the measured
pressure is too low, press the pumping lever down several times
with your foot until the desired pressure is reached.
4. After filling the item, remove the air-pressure hose from the
object.
5. Now completely press down the pumping lever and secure with
the safety hook.
The pressure specifications of the meter are guidelines. Check
the pressure with a calibrated air pressure manometer.
Using
