31
Installation Instructions:
1. Necessary preparatory work:
- Remove the floor mat from the luggage compartment.
- Remove the luggage compartment trim rear left and rear right.
- Remove the rear bumper and rear impact dampers.
2. Glue gaskets (1) to struts (2). (Remove the
protective film beforehand.)
3. Insert struts (1) into the left and right frame
side members of the vehicle. Position
reinforcement plates (2) on struts (1) from
inside the luggage compartment and bolt
them loosely to the body using the M10x32
hexagon bolts (3) and 10,5x25x3 washers.
4. Remove trim (1) from the bumper carrier.
Cut away trim (1) along the premarked lines
(2).
5.
Note:
Before mounting the towing
attachment, lay the wiring to the socket.
Position towing attachment (1) into the carrier
(2) of the bumper and secure it in place with
the existing bolts (3).
Tightening torque: 40 Nm
GB
Summary of Contents for 303 155 600 001
