![background image](http://html1.mh-extra.com/html/westfalia/28-26-40/28-26-40_instruction-manual_962860016.webp)
11
Operation
Charging with the 12 V DC Cable
Charging the unit in a parked car with the engine running is not allowed due to
environmental regulations. Charging the unit in a moving car is not allowed as
well, because such a device cannot be legally operated in a moving car.
1. Before charging from a car battery, make sure that the car battery is in
good condition and fully charged.
2. Set the ON/OFF switch (2) to OFF.
3. Connect the 12 V cable (11) to the charging socket (9) of the power pack
and the cigarette lighter socket of your car. The charging indicator LED
lights up.
4. A full charge can take, depending on the charging state of the battery, up
to 6 hours. After that, disconnect the power pack from the car’s electric
system to avoid draining the car’s battery.
Charging State Indicator
To check the charging state of the unit set the ON/OFF Switch (2) to the ON
position and the charging state indicator (7) indicates the charging condition of
the unit:
Indicator Charging
State
upper green
fully charged
green
still sufficiently charged
yellow
poor loading condition
red charge
immediately