WESTERSTRAND 119405-00 Instructions Manual Download Page 9

Document: 1463en08.doc

Author: CAn

Date: 2000-06-22

Page: 5 of 10

WESTERSTRAND URFABRIK AB

P.O. Box 133

Tel. +46 506 48 000

Internet::

www.westerstrand.se

SE-545 23  TÖREBODA

Fax. +46 506 48 051

E-mail:

 [email protected]

Settings of dip-switches

Before mounting the clock to the back plate, operating mode must be selected via 5 dip-switches
at the backside of the clock (Fig. Clock backside). Dip 3, 4 and 5 selects which clock
synchronisation to use. Dip 1 and 2 selects which daylight saving rules to use (if any).

At the backside of the clock there are 5 dip-switches to configure the clock:

Dip

3

4

5

Off

Off

Off

Stand-alone clock.

Off

On

Off

Radio synchronisation (DCF, MSF, RDS)/ IRIG-B, LON, LTC.

Off

Off

On

Impulse clock 1/2 minute (sync).

Off

On

On

Impulse clock 1/1 minute (sync).

On

Off

On

Impulse clock 1/2 minute (slave).

On

On

On

Impulse clock 1/1 minute (slave).

Dip

1

2

Off

Off

No automatic daylight saving correction.

Off

On

Finnish daylight saving rules (First Sunday between 25-31 march at 3:00 and
first Sunday between 25-31 October at 4:00).

On

Off

Middle Europe daylight saving rules (First Sunday between 25-31 march at
2:00 and first Sunday between 25-31 October at 3:00).

On

On

England daylight saving rules (First Sunday between 25-31 march at 1:00 and
first Sunday between 25-31 October at 2:00).

Note: When the clock is configured as a 1/1 minute impulse slave or a 1/2 minute impulse
slave, dip 1 and 2 must be Off (No automatic daylight saving correction).

Summary of Contents for 119405-00





















Reviews: