WESTERSTRAND 119405-00, Instructions Manual

Page: 11 / 20

Document: 1463en08.doc
Author: CAn
Date: 2000-06-22
Page: 7 of 10
WESTERSTRAND URFABRIK AB
P.O. Box 133 Tel. +46 506 48 000 Internet:: www.westerstrand.se
SE-545 23 TÖREBODA Fax. +46 506 48 051 E-mail: info@westerstrand.se
Manual programming
The clock has three buttons (R, F, P) located at the right side of the clock. When pressing the
‘R’ button the clock returns to base mode (the time is displayed). The buttons ‘F’ and ‘P’ are
used for programming.
Fig. Programming buttons
1. Go to base mode: Press ‘R’
2. Select function by pressing the ‘F’ button until desired function is displayed.
One of the following texts:
Time (TinE), Programming of time
Date (dAtE), Programming of date
Spec (SPEC), Programming of display light intensity.
DCF (dCF), This menu is only available if the clock is
configured as a DCF clock.
3. To enter a displayed function, press the ‘P’ button.
4. Press the ‘P’ button until desired value is displayed.
5. Accept with ‘F’.
Time
The display shows:
Press ‘P’ until desired hour is displayed. Accept with ‘F’
The display shows:
Press [P] until next minute is displayed. Press [F] at the new minute.
The display shows:
The Programming of the time is done.
HH:23
nn:59
date