Lit. No. 79551, Rev. 07
29
June 15, 2022
MOUNTING SNOWPLOW TO VEHICLE
1. After seating the snowplow horns in the
receiver brackets, pull the handle up; the shoe
will lift off the ground.
2. Pull and hold the lock pin out; then rotate the
handle UP and release the lock pin. It must
lock into the UPPER hole. The stand hook
must grip the receiver pin.
3. Repeat Steps 1 and 2 on other side of
snowplow. (Not required for HTS™ blades.)
4. Connect the electrical plugs.
ON
Handle
Shoe
Handle
Receiver Pin
Stand Hook
(Pull)
Lock Pin
ON
Summary of Contents for UltreMount 2
Page 3: ......
