Lit. No. 31006/31010, Rev. 00
17
June 1, 2022
WIRING AND HARNESS INSTRUCTIONS
3. Route the license plate light electrical lead through
a grommet on the electrical box.
ACCESSORY LICENSE PLATE LIGHT
NOTE: Apply anti-seize to all hardware to prevent
galling.
1. Using the two #10 x 5/8" screws and nuts, fasten
the license plate light to the bracket. Using the two
license plate screws, fix the license plate to the
bracket and license plate light.
2. Remove the nuts and washers from the two
1/2" carriage bolts on the powergroup. Place the
bracket on the studs and re‑install the washers
and nuts. Install the harness.
Bracket
License Plate Light
License Plate
