Lit. No. 31006/31010, Rev. 00
13
June 1, 2022
INSTALL SPINNER DRIVE ASSEMBLY
NOTE: Complete the assembly installation in the
Chute Assembly section before proceeding with
these instructions.
1.
Carefully set the spinner drive assembly on the
ground. Orient it in operating position as shown
below.
2. Attach the spinner drive assembly to the spreader
with the lock pins from the parts box.
Install the
upper lock pin first.
The upper lock pin goes through the lower chute
support holes and the upper chute pin ear holes.
The lower lock pin goes through the lower chute
pin ear holes and the chute support.
Secure each lock pin with a cotter pin.
3.
Connect the spinner motor harness to the female
connector extending from the rear of the hopper.
Cotter
Pins
Lock
Pins
MOUNTING THE SPREADER
