Lit. No. 49583, Rev. 02
10
June 1, 2016
INSTALLATION INSTRUCTIONS
Retainer Bar
5/16" x 1-1/4" Cap
Screws & Locknuts
Retainer Bars
Rubber
Deflector
7‑1/2' AND 8' POLY BLADE SNOW
DEFLECTOR
POLY PRO‑PLOW
®
Series 2 Blades Only
Align the holes in the rubber deflector material with
the holes in the poly blade frame top angle. Starting at
one end, align the end hole in the retainer bar with the
end hole in the deflector and blade frame top angle.
Loosely install 5/16" x 1-1/4" cap screws and locknuts
in the retainer bar holes.
Position the remaining retainer bars and loosely install
the fasteners.
Tighten the fasteners starting from the center of the
blade and working out toward each end.
BLADE GUIDE ASSEMBLY
Insert the pointed end of the clamp into the coil of
the blade guide rod. Attach a blade guide rod to each
outer rib using 5/16" x 1" cap screws and locknuts.
5/16"
Locknuts
Blade Guide
Flag
Blade
Guide
Rod
S-Hook
Clamp
5/16" x 1"
Cap Screws
