Lit. No. 49583, Rev. 02
9
June 1, 2016
INSTALLATION INSTRUCTIONS
A‑FRAME TO BLADE ASSEMBLY
1. Align the pivot bolt hole on the A-frame with the
pivot bolt hole on the quadrant ("
B
").
2. Install the pivot bolt from the top. Secure with a
1" locknut and tighten the locknut as much as
possible while allowing the A-frame and quadrant
to pivot.
3. Move the snowplow into normal operating position.
4. Remove the protective packaging from the
angle rams.
5. Align the holes in the angle rams with the angle
ram holes on the quadrant ("
A
" and "
C
"). Attach
using the two 1" x 3-5/16" clevis pins from the top.
Secure with 1/4" x 2" cotter pins.
PRO‑PLOW
®
Series 2 Blade
MIDWEIGHT™ Blade
A
B
C
A
B
C
1" Locknut
Pivot Bolt
1" x 3-5/16"
Clevis Pin
1" x 3-5/16"
Clevis Pin
1/4" x 2"
Cotter Pin
A
C
B
1" Locknut
Pivot Bolt
1" x 3-5/16"
Clevis Pin
1" x 3-5/16"
Clevis Pin
1/4" x 2"
Cotter Pin
A‑Frame/Lift Frame Assembly
