Page 6
APS-8M Asynchronous Port Switch; Quick Start Guide
5.
Exit Command Mode:
At the "APS>" command prompt, type
/X
and
press
[Enter]
. The APS-8M will exit command mode.
6.
Access Command Mode via Modem:
From a PC with a modem and Telco
line, dial the number for the line which is connected to the
APS-8M’s internal modem. Once the connection is established, the unit
should send the "APS>" command prompt, indicating that you have
successfully accessed command mode.
Note:
If a password that permits access to Supervisor Mode has been
previously defined, a prompt will be displayed. Key in a Supervisor
Level password, and press
[Enter]
. If a Supervisor Level password has
not yet been defined, the prompt will not be displayed.
a) Type
/H
and press
[Enter]
to display the Help Menu. If desired, you
may also wish to repeat the Port Connection / Disconnection examples
described in Step 4 above.
b) When you have finished communicating with the APS-8M unit, type
/X
and press
[Enter]
to exit command mode and terminate the modem
connection to the unit.
This completes the Quick Start Guide for the APS-8M. Prior to placing the
unit into operation, it is recommended to refer to the APS-8M User’s Guide for
important information regarding advanced configuration capabilities and more
detailed operation instructions. If you have further questions regarding the IPS
unit, please contact WTI Customer Support as described in the User’s Guide.
