Attention
1. Turn on the power and make sure it won't surpass the electric current.
2. Make sure to fix leakage protection device, and the socket must be connected
with earth line.
3. Please don't block the water recycle net by any part of your body, if that occurs,
turn off the pump or power at once.
4. A switch for the supply of the hot/cool water must be installed, when stop to use
this product. The water supply switch and the power source switch should be
turned off.
5. Check the water level if it is 10-20 mm above the spray nozzle before you start
the pump or the pump could be damaged.
6. Dispose of this product according to the local law when it is out of use.
7. Please contact the local dealer for help if you have any problem.
Circuit diagram
9
6. The electric appliances recommended by illegal manufacturers must not be
connected to the controller.Unapproved dismantling and modification of the
enclosed internal wiring are strictly prohibited. It is not allowed to connect or
plug the wires and plug-in units on the power supply box during the power-on.
7. The connecting wires of the power supply box should be connected and
plugged correspondingly according to the tags and specifications of the
connectors. The output wires can not be short circuited each other.
8. After using, please cut off the power to avoid aging of the device.
9. The installation of the controller must be performed in strict compliance with
the installation instructions by qualified persons.
10. No recoverable elements exist in the controller. Don’t try to improve it by
yourself for the high voltage in the controller can cause dangers. The
maintenance and adjustment must be performed by professionals.
For any consequences caused by wrong operation, the user should bear the
responsibility.
