Western Digital Data Lifeguard Diagnostic Utility, User Manual, Page: 4 / 21

DATA LIFEGUARD DIAGNOSTICS (DLGDIAG)
INTRODUCTION – 1
USER MANUAL
Introduction
The
Data Lifeguard
d
iagnostic
utility
(DLGDIAG) is designed to test WD hard
drives
for errors. If DLGDIAG reports errors, you can use the program to attempt to restore
the hard drive to a defect-free status.
DLGDIAG supports WD external and SATA hard drives. It also supports EIDE hard drives
installed on both primary and secondary IDE ports (either the motherboard or a controller
card). DLGDIAG must be run separately to test each WD hard drive in the system.
Depending on your hard drive model and diagnostic requirements, you can use either the
Windows or DOS version of DLGDIAG. Windows and DOS versions of the DLGDIAG
software are available at
support.wdc.com/download .
DLGDIAG Options
Windows
„
Quick Test — performs a quick S.M.A.R.T. self-test to gather and verify the Data
Lifeguard information contained on the drive.
„
Extended Test — performs a Full Media Scan to detect bad sectors. Test may take several
hours to complete depending on the size of the drive.
„
Write Zeros — writes zeros to the drive using the Full Erase or Quick Erase option.
Erases all data on the drive by writing zeros to each sector – file system and data will be
lost.
„
View Test Results — displays results for the last hard drive tested.
DOS
„
Select Drive — selects the hard drive to test and displays status for all hard drives.
„
Quick Test — tests the drive quickly for any major physical problems.
„
Extended Test — checks the drive thoroughly for any major physical problems.
„
Write Zeros To Drive — wipes any and all data off the drive. Use this option when your
data is no longer usable or recoverable.
„
View Test Results — displays results for the last hard drive tested.
„
Print Test Results — prints results for the last hard drive tested (USB printers not
supported).
„
Log File Open/Close — stores results for all hard drives tested (DLGDIAG.LOG)
„
Enter & Print RMA Information — enters and prints RMA information for returning a
hard drive to WD.
„
Help — brief descriptions of each option and explanations of error codes.
„
Quit — reboot your system once you have completed the selected tasks.
1