Western Digital Data Lifeguard Diagnostic Utility, User Manual, Page: 18 / 21

DATA LIFEGUARD DIAGNOSTICS (DLGDIAG)
DLGDIAG FOR DOS – 15
USER MANUAL
Error/Status Codes
Go to support.wdc.com for further information on many of the error codes listed below as well
as error codes from previous versions of Data Lifeguard Diagnostics.
If you encounter the same error code more than once after restesting, create an RMA
(see “Enter & Print RMA Information” on page 14).
Description Error/Status Code
COMPLETED WITHOUT ERRORS 0
ABORTED BY HOST 1
INTERRUPTED BY DRIVE RESET 2
INCOMPLETE DUE TO ERROR 3
UNKNOWN ELEMENT FAILURE 4
ELECTRICAL ELEMENT FAILURE 5
SERVO/SEEK ELEMENT FAILURE 6
READ ELEMENT FAILURE 7
HANDLING FAILURE 8
UNKNOWN TEST STATUS 9
UNKNOWN TEST STATUS 10
UNKNOWN TEST STATUS 11
UNKNOWN TEST STATUS 12
UNKNOWN TEST STATUS 13
UNKNOWN TEST STATUS 14
TEST IN PROGRESS 15
ERRORS FOUND 100
UNKNOWN ERROR 101
SEEK TIMEOUT 102
WRITE FAULT ERROR 103
DRIVE NOT READY 104
BUSY GLITCH 105
TRACK 0 ERROR 106
CHECK SUM ERROR 107
SEEK NOT COMPLETE 108
DRQ WAS SET 109
DRQ NOT EXPECTED 110
DIAG COMMAND ERROR 111
IRQ TIMEOUT 112
DRIVE TABLE ERROR 113
TRANSFER RATE ERROR 114
ICRC ERROR 115
IDNF ERROR 116
UNCORRECTABLE ECC ERROR 117
DAM ERROR 118
NO MULTI 119
NO DRIVE FOUND 120
SERVO ERROR 121 121
UNKNOWN ERROR 122
UNKNOWN ERROR 123