3.
Installing
Installation Requirements
1. Please install the inverter(s) in places that can avoid
inadvertent contact.
2. Please install the inverter on solid/smooth surfaces.
3. The inverter(s) should not be installed near inflammable
or explosive objects.
A second
terminal is equipped at the bottom of the inverter.
PE
10mm²
PE Conductor cross-section:
Ensure the
terminal is reliably grounded and the grounding resistance is less
PE
than 10 Ohm.
3.2
Installing the PE Cable
Object
Description
1
Housing
2
M5 terminal lug with protective conductor
3
M5×13 pan head screw
Tighten it firmly into the housing (T25 screwdriver, torque: 2.5Nm).
NOTICE
Proper grounding connection of the second
terminal and the
terminal is mandatory.
properly connecting
PE
AC
NOT
both
will void all product warranty.
PE
Packing List
Inverter
Mounting
Bracket
Mounting
Accessories
B
-UP
ACK
Connector
Wi-Fi stick Documents
1
1
1
1
1
1
2.
Direct
Sunlight
Rain
Exposure
Snow
Lay up
AVOID
1.
&
or
LCD LED
LED
2. DC switch
3. PV Terminal (s)
4. Battery Terminal (s)
5. COM1: Wi-Fi / GPRS Stick
6. COM2: DRED / CT Terminal
7. BMS: CAN Terminal
8. BACK-UP Terminal
9. AC Terminal
. Second PE Terminal
10
Product Overview
1.
Dimension:W×H×D=425 x 3
x 160mm
51
1
M
Plug
eter
Step 1
Step 2
Step 3
Step 4
Step 5
1 0mm
6
AC-GRID
Connector
3.3
AC-GRID & BACK-UP Wire Assembly and Connection
Danger to Life due to High Voltages in the Inverter
Before connecting any electrical wires and components, please ensure the
switch &
circuit breaker are switched
DC
AC
and cannot be reactivated.
OFF
DANGER
Insert the conductor into a suitable
ferrule acc. to
46228- and crimp
DIN
4
Insert the crimped conductors L, N and PE
into corresponding terminals and tighten the
screws (torque
N·m)
2.3
Assemble the locking cap,
threaded sleeve and swivel
nut together
Screw the
connector
AC
firmly into the socket
Step 1
Step 2
Step 3
φ-
91
4 m
m
PE
L
N
1
2
3.3.1
BACK-UP Wire connection is as below
Approx. 45 mm
Approx. 10 mm
For “L” and “N”
For “PE”
Approx. 50mm
6mm²
Approx. 45 mm
Approx. 10 mm
For “L” and “N”
For “PE”
Approx. 50mm
10mm²
N
L
PE
3.3.2
AC-GRID Wire connection is as below
Step 1
Step 2
Step 3
1
Mounting
3.1
3.1.1 Use the mounting paper guide to mark holes on the wall,
Drill three holes in the marked position of 10mm diameter and 70mm depth
3.1.2 Fix the expansion bolts and mount the main bracket with the screws in mounting accessories
3.1.3 Attach the inverter to the mounting bracket. Mount the supporting bracket at the bottom of the inverter
3.1.4 Check both sides of heat sink and ensure the inverter is stably attached
3.1.5 Use M5 screw ( torque:2.5Nm ) to attach the heat sink fins to the munting bracket
3.1.6 It is recommended to attach an anti-theft lock to the inverter
Battery
Plugs
(SUNCLIX)
1
φ-
13
m
18
m
2
PV Plugs
or D4
MC4
W
H
D
1
2
3
4
5 6
7
8
9
10
1
2
3
EN
W-HHS-3000 / W-HHS-3680 / W-H
-5000 / W-HHS-6000
HS
Note: Please ensure that the connector has been correctly installed!
In scenarios where the Backup and/or AC port is not used, you
shall install the connectors to the port(s) to prevent safety risks.
Quick Installation Guide
