Westermo TD-22 AC, Installation Manual

Page: 36 / 51

37 6177-2203
Bit 5 RLSD (DCD) behaviour (&Cn)
0 =
&C0 selected (Default.)
1 = &C1 selected
Bit 6 DSR behaviour (&Sn)
0 =
&S0 selected (Default.)
1 = &S1 selected
Bit 7 Long space disconnect (Yn)
0 =
Y0 (Default.)
1 = Y1
S22 – Speaker/Results Bit Mapped Options Status (Read only register)
Indicates the status of command options.
Bits 0-1 Speaker volume (Ln)
0 =
Off (L0)
1 = Low (L1) (Default.)
2 = Medium (L2)
3 = High (L3)
Bits 2-3 Speaker control (Mn)
0 =
Disabled (M0)
1 = Off on carrier (M1) (Default.)
2 = Always on (M2)
3 = On during handshake (M3)
Bits 4-6 Limit result codes (Xn)
0 =
X0
4 = X1
5 = X2
6 = X3
7 = X4 (Default.)
Bit 7 Dial abort option (AT&a)
0 =
Do abort (&A0) (Default.)
1 = No abort (&A1)
S23 – General Bit Mapped Options Status (Read only register)
Indicates the status of command options.
Bit 0 Grant RDL
0 =
RDL not allowed (&T5) (Default.)
1 = RDL allowed (&T4)
Bits 1-3 DTE Rate
0 =
0 – 300 bps
1 = 600 bps
2 = 1200 bps
3 = 2400 bps
4 = 4800 bps
5 = 9600 bps (Default.)
6 = 19200 bps
Bits 4-5 Assumed DTE parity
0 =
even
1 = not used
2 = odd
3 = none (Default.)