Westermo TD-22 AC, Installation Manual

Page: 32 / 51

33 6177-2203
Result Codes
When a command is sent from the terminal the modem replies with a result code. The reply may be
either in Long Form i.e. text (V1) or in Short Form, i.e. a two digit code (V0). The result code in
Long Form is followed by <CR><LF> and in Short Form by <CR>. The result codes are enabled by
using the Q1 command.
The result codes and their short forms are as follows:
00
OK The OK code is returned to acknowledge execution
of a command line.
01 CONNECT The modem will send this result code upon
connecting with 300 baud.
02 RING Incoming ringing is detected on the line.
03 NO CARRIER No carrier is detected.
04 ERROR The modem will send this result code when it´s
unable to execute a command contained on the
command line.
05 CONNECT 1200 For connections with 1200 baud
06 NO DIALTONE No dial tone is received.
07 BUSY Busy (engaged) signal is detected on the line.
08 NO ANSWER No answer from remote modem detected on the
line until the expiration of the time S7.
09 CONNECT 600 For connections with 600 baud on the DTE.
10 CONNECT 2400 For connections with 2400 baud on the DTE
11 CONNECT 4800 For connections with 4800 baud on the DTE
12 CONNECT 9600 For connections with 9600 baud on the DTE
16 CONNECT 19200 For connections with 19200 baud on the DTE
22 CONNECT 75TX/1200RX V.23 connections with 75 on TX and 1200 baud
on RX
23 CONNECT 1200TX/75RX V.23 connections with 1200 on TX and 75 baud
on RX
24 DELAYED If dialled number not allowed to dial yet
32 BLACKLISTED If dialled number is not allowed
33 FAX If it's a fax connection
34 +FCERROR Error in fax connections
35 DATA Connected as data modem
40 CARRIER 300 300 baud carrier
42 CARRIER 600 600 baud carrier
44 CARRIER 1200/75 V.23 1200/75 baud carrier
45 CARRIER 75/1200 V.23 75/1200 baud carrier
46 CARRIER 1200 1200 baud carrier
47 CARRIER 2400 2400 baud carrier
66 COMPRESSION: CLASS 5 MNP class 5 compression aktive
67 COMPRESSION: V.42 bis V.42 bis compression aktive
69 COMPRESSION: NONE No compression aktive
70 PROTOCOL: NONE No error correction aktive
77 PROTOCOL: LAPM LAPM error correction aktive
80 PROTOCOL: ALT MNP4 error correction aktive
81 PROTOCOL: ALT-CELLULAR MNP10 with Cellular aktive
100 NOVRAM ERROR Error in memory
101 NO NOVRAM No memory mounted
102 SWITCH ERROR Error in switches
103 INACTIVITY TIMEOUT Inactivity time limit reached