RT-220-HV / RT-220-LV User Guide
Page 28 (31)
4 Configuration and Use
The operation parameters in configuration files define the functionality. The complete configuration process is
described in reference document Software 6 Management Guide [1].
4.1 LED Indicators During Power Up Sequence
LED behavior during power-up sequence is described in reference document Software 6 Management Guide [1] in
the chapter Status Indication.
Figure 15 Power, operation, status and Ethernet LEDs
4.2 Factory Reset Interface, Process for Factory Reset
A factory reset is not typically needed for installation. It is required if the device configuration is lost.
The factory reset functionality is included in both Ethernet port interfaces. The factory reset process is performed
using specific factory reset adapter.
Figure 16 Ethernet Port for Factory Reset
NOTICE: The Ethernet Interface connector fulfills the IP66 protection when the cable plug or the dust cap is
connected. If the Ethernet function is not used in application, the protective dust cap must be closed.
