Westermo Pilot Wire RPW600F, User Manual

Page: 7 / 16

7 6621-2260
Type tests emission
Environmental
phenomena Basic
Standard Environment
Radiated emission
Enclosure
30 MHz – 230 MHz
230 MHz – 1000 MHz EN 55022
Class A EN 55022
Conducted emission
DC power port
0.15 – 30 MHz EN 55022
Class A EN 55022
Type tests temperature
Environmental
Phenomena Standard Test values
Cold test IEC 60068-2-1
Test Ad –25ºC; 96 h
–40ºC; 16 h
Dry heat test IEC 60068-2-2
Test Bd +55ºC; 96 h
+85ºC; 16 h
Damped heat test, cyclic IEC 60068-2-30 6 cycles, 12+12 h
+25ºC ... +55ºC
Storage test IEC 60068-2-48 –40ºC; 96 h
+85ºC; 96 h
Type tests mechanical
Environmental
Phenomena Standard Test values
Vibration response test IEC 60068-2-6
Test Fc 10 – 150 Hz
0.075 mm, 10 – 58 Hz
10m/s², 58 – 150 Hz
1 sweep cycles in each of the three directions
Vibration endurance test IEC 60068-2-6
Test Fc 10 – 150 Hz
20m/s², 58 – 150 Hz
20 sweep cycles in each of the three directions
Shock response test IEC 60068-2-27
Test Ea Peak acc: 100 m/s²
Duration: 11 ms
3 pulses in each of the six directions
Shock withstand test IEC 60068-2-27
Test Ea Peak acc: 300 m/s²
Duration: 11 ms
3 pulses in each of the six directions
Bump test IEC 60068-2-29
Test Eb Peak acc: 200 m/s²
Duration: 16 ms
1000 pulses in each of the six directions
Type tests insulation
Test Standard Test values
Dielectric test EN 60255-5 5 kVac, Pilot Wire – Power
5 kVac, Pilot Wire – GND
2 kVac, Power – GND
Impulse voltageTest EN 60255-5 5 kV
Isolation resistance test EN 60255-5 0.5 kV, >100M
Ω
Protective bonding resistance EN 60255-27 <0.1
Ω
(60 s)