123
Event
Type:
Super
Ring
Failure
Select
Super
Ring
Failure.
When
the
Rapid
Super
Ring
topology
is
changed,
the
system
will
short
Relay
Out
and
lengthen
Alarm
LED.
Once
you
finish
configuring
the
settings,
click
on
Apply
to
apply
your
configuration.
4.11.2
Event
Selection
Event
Types
can
be
divided
into
two
basic
groups:
System
Events
and
Port
Events.
System
Events
are
related
to
the
overall
function
of
the
switch,
whereas
Port
Events
related
to
the
activity
of
specific
ports
System Event
Warning Event is sent when…..
Device Cold Start
Power is cut off and then reconnected.
Device Warm Start
Reboot the device by CLI or Web UI.
Authentication
failure
An incorrect password, SNMP Community
String is entered
.
Time Synchronize
Failure
Accessing to NTP Server is failure.
Fault Relay
The DO/Fault Relay is on.
Super Ring Topology
Changes
Master of Super Ring has changed or backup
path is activated.
SFP DDM Failure
The readed information of DDM SFP
transceiver is over temperature or out the
range of TX/RX power.
Power Failure
Power (AC, DC1, DC2 or Any) is failure.
Port Event
Warning Event is sent when…..
Link-Up
The port is connected to another device
Link-Down
The port is disconnected (e.g. the cable is
pulled out, or the opposing devices turns
down)
Proudly Distributed by Gross Automation | (877) 268-3700
www.westermosales.com | [email protected]
