72
VLAN
ID:
ID
of
the
VLAN.
Name:
Name
of
the
VLAN.
Status:
Static
shows
this
is
a
manually
configured
static
VLAN.
Unused
means
this
VLAN
is
created
by
UI/CLI
and
has
no
member
ports.
This
VLAN
is
not
workable
yet.
Dynamic
means
this
VLAN
is
learnt
by
GVRP.
After
created
the
VLAN,
the
status
of
this
VLAN
will
remain
in
Unused
status
until
you
add
ports
to
the
VLAN.
4.5.5
CLI
Commands
of
the
VLAN
Command
Lines
of
the
VLAN
port
configuration,
VLAN
configuration
and
VLAN
table
display
Feature
Command Line
VLAN Port Configuration
VLAN Port PVID
Switch(config-if)# switchport trunk native vlan 2
Set port default vlan id to 2 success
Port Accept Frame
Type
Switch(config)# inter fa1
Switch(config-if)# acceptable frame type all
any kind of frame type is accepted!
Switch(config-if)# acceptable frame type
vlantaggedonly
only vlan-tag frame is accepted!
Ingress Filtering
Switch(config)# interface fa1
