3.5. LED Indicators
LED
Status
Description
ON
OFF
Product has no power
GREEN
All OK, no alarm condition
RED
Alarm condition, or until product has started
up. (Alarm conditions are configurable, see
WeOS user documentation
BLINK
Location indicator ("Here I am!"). Activated
when connected to WeConfig tool, or upon
request from web or/and CLI. RED BLINK
during boot indicates pending cable factory
reset.
RSTP/
USR1
Configurable, see WeOS user Guide
FRNT
OFF
FRNT disabled
GREEN
FRNT OK
RED
FRNT error
BLINK
Product configured as FRNT focal point
DC1
OFF
Product has no power
GREEN
Power OK on DC1
RED
+DC1 input voltage is below operating
voltage limit
DC2
OFF
Product has no power
GREEN
Power OK on DC2
RED
+DC2 input voltage is below operating
voltage limit
USR2
Configurable, see WeOS user Guide
TX/FX
ports
OFF
No link
GREEN
Link established
GREEN
FLASH
Data traffic indication
YELLOW
Port alarm and no link. Or if FRNT or RSTP
mode, port is blocked.
Table 5. LED indicators
14
Lynx 5600 Series
