Ibex-RT-610 Series User Guide
Westermo Network Technologies
15
3.4.3
Antenna Ports
The antenna connectors are identified on the product with A1 to A4 and B1 to B2. QMA industrial
standard connector is used.
A1 to A4 are used for WLAN Wave 2 communication at 5 GHz. At least A1 must be connected to an
external WLAN antenna if Wave 2 module is used. The antenna configuration is made through the
Software interface.
B1 and B2 are used for WLAN Wave 1 communication at 2.4 GHz / 5 GHz. At least B1 must be
connected to an external WLAN antenna if Wave 1 module is used. The antenna configuration is
made through the Software interface.
NOTICE
Any unused antenna ports must be properly terminated with 50 Ohm, otherwise
the device might be damaged when power is applied to a non-terminated antenna
port.
NOTE
To ensure specified IP protection, suitable QMA connectors / cables and
terminations must be used.
3.5
LED Indicators
LED
Description
DC
Power status
OPR
Operation status
ERR
Error status
X1
Ethernet status for X1 port
X2
Ethernet status for X2 port
NOTE
Refer to management guide for detailed LED status indication.
3.6
Factory Reset
To reset the product into factory default settings, a reset adapter is needed which is plugged into one
of the Ethernet ports X1 or X2 during startup.
Art. no.
Description
3623-0799
Factory Reset Plug, X-coded
Table 7 Factory reset plug