51
925.224.3 - EN
INSTRUCTIONS PERTAINING TO THE INSTALLER
19. INFORMATION DISPLAY
19.2 OPERATION INFORMATION
To display some useful information during the boiler operation proceed as follows:
•
Press the
( )
button for at least 6 seconds until the display shows “
A00
” (…“A07”) alternating with the respective
value (e.g. figure 13);
To correct light the boiler, proceed as follows:
• Provide power supply to the boiler.
When the gas boiler is power supplì, the display shows the following information:
1.
all symbols alight;
2.
manufacture information;
3.
manufacture information;
4.
manufacture information;
5.
Type of boiler and gas used (eg.
).
The displayed letters mean the following:
= natural boiler chamber
= sealed boiler chamber
= natural gas METANE
= LPG gas
6.
Hydraulic system;
7.
Software version (two numbers
x.x
);
• open the gas cock;
• press the
button, for at least two seconds, to set the operating boiler mode (see section 3.2).
19.1 FIRST DISPLAYED INFORMATION
Figure 12
0803_0501 / CG_2016
5 seconds
