WEST PAM-190-P Series Page 3 Technical Documentation Manual Download

Page: 3 / 24

Page 3 of 24

PAM-190-P-A/I

05.06.2020

1 General Information

1.1 Order number

PAM-190-P-A

Power amplifier for proportional valves with 0… 10 V input and M12 connector

PAM-190-P-I

Power amplifier for proportional valves with 4… 20 mA input and M12 connector

Alternative products

PAM-190-P-IO

- Amplifier plug for proportional valves with IO-Link interface

PAM-140-P

- Mobile amplifier in IP65 housing with

0… 10 V or 4… 20 mA command signal input

PAM-193-P

Amplifier with potentiometers and DIL switches for top hat rail mounting

PAM-199-P

Universal digital amplifier with USB interface for top hat rail mounting

1.2 Scope of supply

The scope of supply includes the module plus the terminal blocks which are part of the housing.

The Profibus plug, interface cables and further parts which may be required should be ordered separately.

This documentation can be downloaded as a PDF file from

www.w-e-st.de

1.3 Accessories

WPC-300

- Start-Up-Tool (downloadable from our homepage

– products/software)

ULA-310

- Programming device with USB interface

SAC-5P-FS

- 5 pin M12 connector with connecting cable

Summary of Contents for PAM-190-P Series

























Search results

Summary of Contents for PAM-190-P Series

Reviews:

Related manuals for PAM-190-P Series

Brands by name

Popular brands

WEST PAM-190-P Series, Technical Documentation Manual

Search results

Summary of Contents for PAM-190-P Series

Reviews:

Related manuals for PAM-190-P Series

Brands by name

Popular brands