36
1.
Press
H/L/MENU
for more than two
seconds to enter Menu Operation.
2.
Press
CH
▼
once to display
SETUP
,
and press
SELECT
briefly.
SETUP
has 9 options as follows. To exit, select
EXIT
.
2-A-1. ALARM SET
This feature allows you to set the alarm.
1.
Press
SELECT
briefly at
SETUP
.
ALARM CLOCK
appears.
2.
Press
SELECT
briefly.
3.
Press
CH
▲
or
▼
to select On.
Then, press
SELECT
for more than two
seconds
4.
Select the hour using
CH
▲
and
▼
,
then press
SELECT
briefly.
5.
Select the minute using
CH
▲
and
▼
,
then press
SELECT
briefly.
2. SETUP
2-A. ALARM CLOCK
This feature is only available when the GPS is connected to the
NMEA0183 Accessory Wires. If it is connected to the GPS, the alarms
are set based on the satellite. You need to set the time previously to
setting the alarm.
UT01920ZB_0 8/16/05 12:34 PM Page 36
