19
WEATHER CHANNELS
To select Weather Channels 0-9, press
WX/ALERT
briefly. The radio will go to the
last selected Weather Channel. Press
CH
▲
or
▼
briefly to select a different Weather
Channel. Most areas of the US are covered by
Weather Channels 1,2, and 3.
To exit from Weather Channel:
●
Press
WX/ALERT
briefly. The radio returns to the previous
Marine channel.
ENTERING CHANNEL NUMBERS INTO MEMORY SCAN
You can enter channels into the radio’s memory so they can be rapidly
scanned. This means that you can have the radio move from one
memorized channel to the next, and have it stop to monitor the channel
only if there is traffic, or conversations, on that channel.
To enter a channel into Memory Scan, select
the channel you want to store by using CH
▲
and
▼
, and then press
MEM/UIC
briefly. The
channel is stored in Memory Scan and
MEM
appears on the Radio Status Display.
To cancel the channel in Memory, press
MEM/UIC
. The
MEM
icon
disappears.
Note:
The Memory channel can be set independently in 3 regional
modes (USA, INT, and CAN). You cannot use this feature in
WX mode or for channel 70.
UT01920ZB_0 8/16/05 12:34 PM Page 19
