US/CN Page
3
of
5
For mounting to joist:
Pre-drill pilot holes at the marker locations. This will make
installing the Wall Anchors (A) into the wall easier.
Use a Phillips Screwdriver to insert the Wall Anchors (A) at the
marked
locations. Do not “push” or pound the Wall Anchors (A)
into the wall, it is designed to bore into the wall like a drill bit.
Slowly turn the Wall Anchors (A) in a clockwise while applying
pressure until the flange of the anchor just touches the wall.
1. Attach the Mounting Plate (G) onto the wall aligning the 4 holes
on Mounting Plate (G) with the 4 installed Wall Anchors(A).
2. Insert the Wall Screws (B) and tighten each to secure Mounting
Plate (G) firmly onto the wall.
1. Position the Shelf with Mounting Plate (G) against the wall at
the desired mounting location.
2. Mark the mounting location of the 4 holes of Mounting Plate (G)
onto the wall using a pencil
. Use a carpenter’s level to ensure a
level installation.
MAKE SURE THAT A POWER OUTLET IS REACHABLE BY
THE CORD without straining the cord.
