US/CN Page
1
of
5
Wood and Glass Shelf Light
Assembly Instructions
Important Safety Instructions:
•
These instructions are provided for your safety. It is very important that they are read carefully and completely before
beginning the assembly and installation of this lighting fixture.
•
The lighting fixture is meant for indoor use. It must be connected only to 3-wire, single-phase electrical supply systems
(provided with Ground wire or equivalent protection system).
•
This fixture has been rated for up to one (1)
40-watt maximum TYPE G standard incandescent light bulb
(not
included) or one (1)
9-watt compact fluorescent light bulb
(not included) or one (1)
12-watt maximum SBLED light
bulb
(one 5-watt SBLED bulb included). To avoid the risk of fire, do not exceed the recommended wattage.
•
This lamp is meant for indoor use, DRY LOCATIONS ONLY.
•
Save these instructions.
WARNING:
•
To reduce the risk of fire, electrical shock or personal injury, always turn off and unplug the light fixture and
allow it to cool prior to replacing the light bulb.
•
Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
•
Keep flammable materials away from lit bulb.
•
Maximum total load weight for the shelf is 20lbs. Do not overload.
Pre-assembly:
Remove all parts and hardware from box along with any plastic protective packaging.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
For your safety and convenience, assembly by two people is recommended.
Tools Required (not included):
