US/CN Page
2
of
5
Parts Included:
(C) Glass Shade (1)
(D)
Light Bulb
(1)
(E) Socket (1)
(F)
Lamp
Cup (1)
(G) Mounting Plate (1)
(H) Wood Shelf (1)
(I) Flat Plate (1)
(J)
Knurled
Nut (1)
(K) Switch (1)
Hardware Enclosed
(A) Wall Anchors (4)
(B) Wall Screws (4)
To assemble:
1. This mounting hardware is meant for dry wall/stud mounting only. If walls are concrete, brick or plaster, please consult
your local hardware store for assistance. For safety and ease of mounting, installation is recommended using two people.
2. Stud mounting is always best, so try to position the Mounting Plate (G) over the studs. Use a stud finder to locate a stud in
desired wall location. If Mounting Plate (G) aligns with stud, only use provided Wall Screws (B). If there is no stud, the Wall
Anchors (A) and Wall Screws (B) are both required.
3.
For Drywall Mounting:
Assemble and install the Wall Anchors (A) and Wall Screws (B) using the steps as outlined in
Section “
FOR DRYWALL MOUNTING
” below.
4.
For Mounting to Joist:
Assemble and install the Wall Screws (B)
using the steps as outlined in Section “
FOR
MOUNTING TO JOIST
” below.
5. After properly assemble the Wall Anchors (A) and Wall Screws (B) onto the wall, install the lighting fixture onto the shelf
using the steps as outlined in Section
“
Install the Light Fixture onto the Shelf
”.
For drywall mounting:
1. Position the Shelf with Mounting Plate (G) against the wall at
the desired mounting location.
2. Mark the mounting location of the 4 holes of Mounting Plate
(G) onto the wall using a pencil
. Use a carpenter’s level to
ensure a level installation.
MAKE SURE THAT A POWER OUTLET IS REACHABLE BY
THE CORD without straining the cord.
