6. Place food into Grater Head attachment opening. Place Food Pusher into the
opening over the food and push down making sure that the large button on the
top of the Food Pusher is pressed down. This action powers the grating
function. Allow food contents to fall from blade into bowl.
CAUTION:
Do not
place fingers inside blade while blade is rotating as injury can occur. If
necessary, extract blade using the plastic cap and remove food content.
Reinsert blade using plastic cap. When complete, remove the Food Pusher
from the Grater Head.
7. Unplug Power Tower from electrical outlet.
8. Release Grater Head from Power Tower base by pushing down on attachment
release button located on the top of the Power Tower base. Wipe attachments
with clean damp cloth, or place in dishwasher, top rack only. NOTE: Use
extreme care when handling grating blade. Do not place any other items next to
blade when cleaning or placing in a dishwasher.
To sharpen knives:
1. Place cutting edge of knife in the knife slot located on
the back of the can opener.
2. Draw the knife blade through the slot several times.
Always use care to direct blade away from
yourself and others.
3. Clean knife after sharpening.
NOTE:
Serrated blades should never be inserted into this unit.
To open bottles:
1. Make sure Bottle/Tab Opener head is securely attached to
top rear of Power Tower Base. Hold top of Power Tower
Base to stabilize the unit. Open bottles slowly to avoid
spilling contents.
2. The Bottle/Tab Opener can be rotated counterclockwise and
removed for cleaning. Wipe attachment with clean damp cloth, or place in
dishwasher, top rack only.
To lift pull tabs:
1. Remove Bottle/Tab Opener head by rotating
counterclockwise as viewed from rear of Power Tower base.
Use metal finger(s) as shown to engage metal pull-tabs on
can.
2. Rotate head to help lift the tab.
3. Remove the Bottle/Tab Opener. Finish lifting the tab by hand.
4. Wipe Bottle/Tab Opener head with clean damp cloth or place in dishwasher, top
rack only.
5. Return bottle/tab opener head to Power Tower base by assembling to rear of
unit. Rotate the head slightly until it is firmly locked into place.
6
