Fully charge the battery prior to first operation.
In a separate container, prepare the solution you
want to spray according to the manufacturer’s
instructions. Open the tank cap and carefully pour
the solution through the intake filter. Securely
tighten the tank cap.
Taking the coiled hose (7), attach the end with the
ON/OFF switch to the spray gun (1). Clip the other
end on to the tank cap (9). It’s important to ensure
the hose is fastened tightly to the spray gun and
tank cap as a loose connection will prevent the the
pump from drawing water through the hose.
Determine which nozzle or attachment is
appropriate for your project. Pull back on the brass
collar of the quick-connect fitting on the spray gun.
Insert the nozzle or attachment and then push the
fitting back into its original position.
a) Short nozzle = adjustable conical nozzle ranging
from jet stream to mist
b) 18-Inch Extension wand = adjustable, ranging
from jet stream to mist
Making sure the ON/OFF switch is in the ON
position, disengage the handle lock (if necessary)
and squeeze the trigger on the spray gun to begin
spraying. When first beginning to spray, it is normal
for the pump to take a few seconds to build up
pressure and draw liquid up from the tank and
through the hose.
STEP 2.
PREPARING TO SPRAY
A)
B)
C)
D)
Copyright © WESSOL, LLC
10