13.
Copyright ©WESSOL, LLC
D).
Connect the electrostatic hose (6) to tank by lining up the male to female connection on
the tank. Insert, then secure fitting by tightening the blue external cap. Repeat connection
process for electrostatic hose to gun.
F).
Place the gun holster (13) on the molded holster bracket on the tank. While holding the
holster, place nut on one side of the hexagonal slots and screw the bolt through the other
side until it fastens into the nut.
E).
Take the electrostatic gun (1) and attach it to the threaded fitting on the end of the hose (6).
Tighten the fitting to ensure the gasket properly seals the connection.
STEP 1.
ASSEMBLING YOUR SPRAYER
