12.
Copyright ©WESSOL, LLC
A).
Before you begin, open the tank lid (2) and remove the 40-micron misting nozzle (10),
120-micron misting nozzle (12) and nozzle wrench (9) from the tank strainer.
*The 80-micron misting nozzle is pre-installed in the gun
C).
Next, slide the adjustable strap through the top tank loop. Continue by sliding the strap
over and under the buckle fitting. Lightly tug at the strap to make sure it’s secure. Repeat
on other side.
B).
Bring the ComfortStraps™ (5) to the bottom of the tank (3). Secure lower strap clips to the
tank loops near the bottom of the tank. Repeat on other side.
STEP 1.
ASSEMBLING YOUR SPRAYER
