This Service Guide is designed as a reference tool to help pinpoint service needs of the Wessel-Werk TK
286 Turbo Brush.
Required Tools
o
#10 Torx Screw Driver
o
Medium Flat Head Screw Driver
Common Spare Parts
o
Brush Assembly Complete
o
Geared Belt
o
Front Wheel with axel
o
Rear Wheel with Axel
o
Clean-out door
o
Pivot Arms
Warning!
o
Do not over tighten screws as screw holes can become stripped.
o
When refastening screws always use the original thread pitch of the screw hole. Failure to use
the original screw orientation will likely drill-out material and strip hole.
o
Easiest way to find the original thread orientation is by counter rotating the screw before turning
the screw into the hole.
o
Manually replace screws! Use of a power screw driver is not recommended for reassembly.
Only Use original replacement parts!
For best results- Only Use original replacement parts!
To avoid warranty invalidation only use original replacement parts!
Summary of Contents for TK 286
Page 1: ...TK 286 Maintenance Guide...
