Replacement Parts
8
Cleaning Brush Roll
It may happen that your agitator brush becomes blocked or
less effective. This may be caused by excessive hairs and
threads wrapped around the brush roller.
Always unplug the nozzle from the power supply first.
Cleaning the brush roller
Insert the points of a pair of scissors under the
hair/debris wrapped around the brush roller (see
Illustration page 7). Move the scissors to catch the
threads and hairs in the scissors.
Cut the threads of hairs and remove them manually
or using a small sized pair of pliers.
Should your nozzle cease to pick-up debris:
This can be caused by an obstruction in the intake and
or neck of the power nozzle. This can be caused when
excessively large or long debris, like paper, a tooth pick
or a sock, is lodged in the intake and/or neck area of the
nozzle.
Always unplug the nozzle from the power supply first.
Clearing an Obstruction
Remove the wand from the nozzle by depressing the
button on the nozzle neck and pulling the nozzle and
wand apart.
Look into the neck and remove any visable debris.
Look into the intake area of the nozzle and remove
any visable debris. (See Illustration Page 7)
5
Description Part
Number
Cover Complete-Light Grey
10.9 048-312
Cover Complete-Black
10.9 048-318
QDC Neck Complete
10.7 028-302
Brush Roll Complete
10.9 048-302
Height Adjustment Assembly
10.9 048-309
Base Assembly Complete -
Black
10.9 048-319
Base Assembly Complete –
Light Gray
10.9 048-313
Wiper Blade
12.1 848-06
Motor Complete 120V
10.9 048-314
Front Wheels with Stirrup
10.9 048-315
Wire Coupler
19.1 063-300
Noise Reducer / anti-
interference capacitor
19.1 041-301
Circuit Protector
19.1 071-301
LED Light Bar Complete
10.4104-300
Axle - Rear
10.1 388-300
Wheel - Rear
10.4-105-301
Belt - Cogged
19.1 016-300
Motor Cover
10.1 367-300
