If the nozzle is deemed too ’hard’ to push accross the
carpet move the height adjustment setting up one
position and review the ease of operation. Continue this
operation one step at a time until the ease of operation
is acceptable.
Note: It is possible to raise the nozzle too high where
effective cleaning will cease.
Cleaning
To achieve the best results when cleaning carpet, slowly
pass the power nozzle back and forth over the area to
be cleaned.
To clean hard surfaces simply move the power nozzle
over the area to be cleaned set the nozzle to #1 height
position, leave the vacuum on and have the power
nozzle on or off.
It is best to avoid cleaning carpet fringes. When it is
unavoidable, place the power nozzle over the carpet and
pull it twoard you over the fringe.
Overload Protection
Your nozzle is equipped with overload protection (circuit
breaker). The circuit breaker will activate when the the
nozzle consumes more power than planned or an
obstruction makes the brush hard to turn. If this occurs:
Turn off the vacuum cleaner and disconnect the
power supply cord.
Remove the object that is preventing the brush from
rotating.
Please note: 30-60 seconds of cool-down time may
be required for the circuit breaker to automatically
reset.
Reconnect the nozzle and proceed to clean.
4
9
