5
3. Attach the Seat (4) to the Seat Post (34) with three
M8 x 1,2mm Washers (53) and three M8 Nylon
Locknuts (46). Note: The Washers and Nylon Locknuts
may be pre-attached to the underside of the Seat.
Remove the Seat Knob (20) by turning it counterclock-
wise. Next, insert the Seat Post (34) into the Frame (1).
Align one of the adjustment holes in the Seat Post with
the indicated hole in the Frame. Insert the Seat Knob
into the Frame and the Seat Post, and turn the Seat
Knob clockwise until it is tight.
Make sure that the
Seat Knob is inserted into one of the adjustment
holes in the Seat Post.
46
4
53
46
20
Hole
1
34
53
3
2. While another person lifts the front of the Frame (1),
attach the Front Stabilizer (6) with two M10 x 70mm
Carriage Bolts (16), two M10 x 1,5mm Washers (54),
and two M10 Nylon Locknuts (44). Next, press two
Acorn Covers (35) onto the Nylon Locknuts.
54
54
1
35
35
6
2
16
44
44
