Weslo PURSUIT S 2.8, User Manual

Page: 5 / 20

5
M8 Split
Washer (42)–9
M8 Locknut
(10)–6
M8 x 15mm Button
Screw (34)–3
M8 x 60mm Button
Screw (30)–4
M8 x 65mm Button
Bolt (50)–2
M8 x 73mm Button
Screw (33)–2
M4 x 16mm
Screw (46)–4
ASSEMBLY
To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tools, assembly requires a Phillips screwdriver , an adjustable
wrench , and pliers .
As you assemble the exercise cycle, use the drawings below to identify the small parts used in assembly. The
number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of
this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small
parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been pre-
assembled.
Meijer.com