8
6. Attach the Handlebar (49) to the Upright (13)
with two M8 x 65mm Button Bolts (50), two M8
Split Washers (42), and two M8 Locknuts (10).
6
50
49
13
10
42
42
8. While a second person holds the Console (16)
near the Upright (13), connect the console wire
to the Extension Wire (23). Then, insert the
wires downward into the Upright.
Tip: Avoid pinching the wires.
Attach the
Console (16) to the Upright (13) with four M4 x
16mm Screws (46).
8
23
46
13
Console Wire
16
7. The Console (16) requires four AA batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. Otherwise, you may damage the
console display or other electronic compo-
nents.
Remove the battery cover, and insert
batteries into the battery compartment;
make
sure to orient the batteries as shown by the
diagram inside the battery compartment.
Then, reattach the battery cover.
7
Batteries
Screw
Battery
Cover
16
Avoid pinching
the wires
Summary of Contents for Pursuit G 2.8
Page 17: ...17 NOTES ...
