8
8. While another person holds the Upright (13) in
the position shown, connect the Extension Wire
(52) to the Reed Switch Wire (43).
Connect the Resistance Cable (19) to the
Lower Cable (45) in the following way:
•
See drawing A
. Pull upward on the metal
bracket on the Lower Cable (45), and insert
the tip of the Resistance Cable (19) into the
wire clip inside the metal bracket as shown.
•
See drawing B.
Firmly pull the Resistance
Cable (19) upward and slide it into the top of
the metal bracket as shown.
•
See drawing C.
Using pliers, squeeze the
prongs on the upper end of the metal bracket
together.
Push the excess wire and cable downward into
the Frame (1), and insert the Upright (13) into
the Frame.
Tip: Avoid pinching the wires.
Attach the
Upright (13) to the Frame (1) with three M8 x
20mm Button Screws (34) and three M8 Split
Washers (42).
A
B
C
45
19
19
Metal
Bracket
Metal
Bracket
1
13
Avoid pinching
the wires
45
19
52
34
34
42
42
8
43
7. Attach the Seat (12) to the Seat Brackets (14,
15) with four M6 x 35mm Button Screws (61)
and four M6 Washers (68).
7
12
68
61
68
68
15
14
61
Summary of Contents for PURSUIT CT 3.8R
Page 17: ...17 NOTES ...
